Can a Heavy-Duty Forklift Load a Flatbed Trailer From One Side?

Nov 17, 2026

Leave a message

Can a Heavy-Duty Forklift Load a Flatbed Trailer From One Side?

 

 

A heavy-duty forklift can load or unload a flatbed trailer from one side if it can fully engage the load at the far-side position, lift it within its approved capacity, and complete the move with enough clearance. The answer depends on where the cargo sits on the deck, how close the truck can approach, and how the load is supported.

When asking for a quotation, start with the farthest load the forklift must handle. A marked-up trailer drawing gives the supplier a clearer starting point than a request for a "12 ton forklift with 4 feet of reach."

What Does "Reach" Mean on a Flatbed?

On a conventional heavy-duty counterbalance forklift, the mast raises the carriage and can tilt within its specified range. The truck moves forward to engage the load. Fork length describes how far the blades project from the fork face, while lift height describes how high they can rise. Load center is the horizontal distance from the fork face, or relevant attachment face, to the load's center of gravity.

Reach trucks and telehandlers use different mechanisms. A warehouse reach truck moves its forks or mast forward using a dedicated reach mechanism. A telehandler extends a boom. Its capacity chart shows how much it can lift at different combinations of height and horizontal reach. A side shifter moves the forks laterally to help align them with the load.

For example, our 12 Ton Forklift lists a rated capacity of 12,000 kg at a 600 mm load center, a standard lift height of 3,000 mm, and fork length configured to suit the cargo. Those are the dimensions and ratings to start with when reviewing a flatbed application. The truck's ability to place a particular load on the far side depends on the confirmed configuration and the layout of the trailer.

Measure From the Side the Forklift Can Approach

Draw the trailer deck from above and mark the only accessible side. Show where the nearest and farthest loads will sit and which way the forks enter each pallet, skid or machine base. Measure the distance from the accessible deck edge to the far load's fork-entry points. Mark the support points the forks need to reach and the available clearance beyond them.

A side view should show deck height, anything that limits how close the forklift can approach, and obstructions the load must clear. Trailer wheels, tie-down fittings and site barriers can all affect the truck's approach. If another piece of cargo sits between the forklift and the far load, show it on the drawing. The loading and unloading sequence can determine whether the far load remains accessible.

When two pieces of cargo have the same external dimensions, their weight can still be concentrated in different places. For machinery or an unevenly loaded skid, provide the center of gravity from the cargo supplier if available. Our guide to forklift load center explains how that distance affects capacity.

Can Longer Forks Solve the Problem?

Longer forks may help when the truck can approach the trailer and the load has suitable fork-entry and support points. Check that the forks can engage the load correctly, bear the required weight, and clear nearby cargo or trailer components. If the proposed setup uses an approved attachment, confirm the capacity of the truck and attachment together at the required load position and lift height.

The selected fork length and the allowable lifting capacity answer different questions. A longer blade can reach deeper under a skid. If handling that skid places its center of gravity farther forward, the permissible load must still be verified using the capacity plate and manufacturer-approved capacity information for that configuration.

If the fork carriage cannot get close enough or another load blocks the approach, options may include changing the cargo layout, arranging access from both sides, or evaluating equipment designed for forward outreach. For a telehandler, compare the required load weight, lift height and working reach together on the chart for the selected attachment.

What Information Should Go With the Forklift Inquiry?

Send the supplier the measurements and conditions that apply to the farthest or most difficult load.

Cargo: Total weight including the pallet or skid, overall dimensions, center of gravity if known, and approved fork-entry and support points.

Trailer: Deck height and width, accessible side, cargo locations, and any side obstructions or nearby loads.

Site: Approach space, ground condition, maneuvering clearance, and the proposed loading or unloading sequence.

Our heavy-duty forklift ordering guide covers the remaining details needed for a quotation. Before work starts, confirm how the trailer will be secured on firm, level ground, how the cargo sequence will affect trailer stability, and how people will be kept clear of the loading area.

For one-sided flatbed work, ask for confirmation of the proposed fork or attachment configuration and its allowable capacity at the farthest required load position. That gives you a specification you can compare against the actual job.

 

References

  1. OSHA - 29 CFR 1910.178, Powered Industrial Trucks
  2. UK Health and Safety Executive - Loading and Unloading Vehicles
  3. Toyota Material Handling - What Is a Reach Truck?
  4. JLG - 943 Telehandler Specifications