What Is A Multi-Piece Rim On A Heavy Duty Forklift?
When looking at the wheels of a heavy duty forklift, it is easy to focus only on the tire size.
But the tire is only one part of the complete wheel assembly.
Some large industrial vehicles with pneumatic tires use a multi-piece rim, where the wheel is assembled from more than one component instead of being formed as one single piece.
One of these components may be a side ring or locking ring that helps retain the tire on the wheel.
Why Use More Than One Rim Component?
Large industrial tires can be heavy, stiff and difficult to mount.
A multi-piece design allows the tire and wheel components to be assembled using a rim system designed for that particular tire size and application.
This type of construction can be found on large industrial and off-road equipment.
However, not every forklift wheel uses the same design.
The actual rim depends on factors such as:
- tire size
- pneumatic or solid tire configuration
- wheel manufacturer
- axle and hub design
- forklift capacity
- application
The wheel therefore needs to be identified from the actual machine rather than assumed from forklift tonnage alone.
"Split Rim" And "Multi-Piece Rim" Are Often Confused
In everyday conversation, people may call this type of wheel a "split rim."
For technical documentation, multi-piece wheel is the clearer term.
It describes a wheel consisting of two or more components, with one component such as a side or locking ring helping retain the inflated tire.
This is different from a conventional single-piece wheel.
Pneumatic And Solid Tires Are Different
Multi-piece rim servicing is mainly relevant when dealing with an inflated tire assembly.
A pneumatic tire contains pressurized air, so the tire and rim together store significant energy.
A solid tire does not use inflation pressure and therefore has a different wheel and tire service condition.
For example, the current Propolift 16 Ton Forklift can be configured with pneumatic tires, while solid tires are also available as an option.
This is why maintenance instructions should always start with the actual tire and wheel configuration on the truck.
Why Does Correct Rim Identification Matter?
Multi-piece wheel components are designed to work as a matched assembly.
Similar-looking rings or rim parts should not automatically be treated as interchangeable.
During inspection, technicians should pay attention to:
- correct wheel component identification
- cracks or deformation
- corrosion
- damaged locking areas
- tire and wheel compatibility
- whether components are properly seated
A damaged rim component is not something that should simply be straightened, welded or modified on site.
Tire Inflation Requires Particular Care
A multi-piece rim contains components that can separate violently if the assembly is damaged, incorrectly matched or improperly serviced while pressurized.
For this reason, tire servicing should be performed only by trained personnel using the applicable wheel manufacturer's procedures and required safety equipment.
The important point for forklift owners is simple:
a large pneumatic forklift tire should not be treated like an ordinary car tire.
If the tire is flat, damaged or requires wheel disassembly, the complete rim configuration needs to be identified before service begins.
What Should Buyers Check?
When comparing heavy duty forklift configurations, buyers normally do not need to select a rim only by looking at its appearance.
More useful information includes:
- front and rear tire size
- pneumatic or solid tire type
- number of tires
- axle load
- working surface
- replacement tire availability
The manufacturer can then match the tire, wheel and axle configuration to the machine.
At Propolift, wheel and tire selection is considered together with the forklift's capacity, axle load and actual working environment.
A multi-piece rim may look like a small detail compared with the complete forklift, but correct identification becomes very important when the tire eventually needs inspection or replacement.

