Why Does A Forklift Hydraulic Tank Need A Breather?
A forklift hydraulic oil tank may look like a closed container, but the amount of oil inside the reservoir is constantly changing during operation.
When hydraulic cylinders extend, oil leaves the tank and flows into the hydraulic circuit.
When the cylinders retract, oil returns to the reservoir.
As the oil level rises and falls, the space above the oil also changes.
This is why the hydraulic tank needs a way for air to move in and out - and that is the job of the reservoir breather.
What Does The Breather Actually Do?
A hydraulic tank breather allows the reservoir to exchange air with the surrounding atmosphere as the oil level changes.
When oil leaves the tank, air needs to enter.
When oil returns to the tank, some air needs to leave.
Without suitable ventilation, unwanted pressure or vacuum conditions could develop inside the reservoir.
However, allowing completely unfiltered outside air into the tank would create another problem: contamination.
That is why hydraulic breathers normally also provide a filtration function.
Outside Air Can Carry Contamination
A forklift may work around:
- dust
- sand
- metal particles
- industrial debris
- moisture
- other airborne contamination
Every time the hydraulic reservoir draws in outside air, these contaminants have an opportunity to enter the system.
A suitable breather filter helps remove airborne particles before the air reaches the hydraulic oil.
This makes the breather part of the overall hydraulic oil cleanliness strategy, even though it is not located in the main high-pressure hydraulic line.
Why Does The Oil Level Change During Operation?
The hydraulic reservoir does not remain at one fixed fluid level throughout every operating cycle.
For example, when a large lift cylinder extends, oil is transferred from the reservoir into the cylinder.
The reservoir level falls.
When the cylinder retracts, oil flows back and the level rises again.
Attachments with additional hydraulic cylinders can create further oil-volume changes during operation.
The reservoir therefore needs to "breathe" as these hydraulic functions cycle.
A Dirty Breather Can Become A Maintenance Issue
Like other filters, a breather does not remain clean forever.
Dust and contamination can gradually accumulate in the filter element.
If the breather becomes heavily restricted, the reservoir may not exchange air as freely as intended.
For forklifts operating in dusty environments, the breather therefore deserves attention during routine maintenance.
The inspection interval should follow the actual machine and working conditions rather than one universal schedule.
Breather And Hydraulic Filter Are Different Components
A reservoir breather should not be confused with the hydraulic oil filter.
The breather filters incoming atmospheric air.
The hydraulic filtration system removes contamination from the hydraulic oil as it circulates through the machine.
Both contribute to contamination control, but they work in different places and perform different jobs.
Humid Environments Can Need Additional Attention
Airborne particles are not the only possible concern.
Ambient air can also contain moisture.
As a hydraulic system heats up and cools down, humid air entering the reservoir can contribute to moisture contamination.
Some industrial hydraulic systems therefore use breathers designed to control both particles and moisture.
The appropriate breather design depends on the hydraulic system and working environment, so it should not be selected only by physical size.
A Small Component With An Important Job
At Propolift, the hydraulic system is considered as a complete circuit rather than only a pump and cylinders.
The reservoir, filters, hoses, valves, seals and breathers all contribute to how the system operates and how contamination is controlled.
The hydraulic tank breather has a simple job:
let the reservoir exchange air while helping keep unwanted contamination out.
For heavy duty forklifts working long hours in industrial environments, maintaining this small component is one part of keeping the hydraulic oil and system in suitable condition.

